SIL hybrid bow - 3D printing
Basic printing parameters
- Rafts: No
- Supports: No
- Nozzle: 0.4 mm
- Resolution: 0.2 mm
- Wall thickness: 1.6 mm (4 shells)
- Infill: 25%
- Filament material: PLA or PETG
- Minimum bed dimensions: 210x210 mm
3D printer must be well calibrated (extruder steps, flowrate, first layer height).
For reasons of strength and durability, I recommend printing all elements with a wall thickness
of 1.6 mm (4 shells), a thickness of 1.2 mm bottom and top walls, and infill 25%. I recommend printing the magazine_spring_lever_part1 and the release with a wall thickness of 2.0 mm (5 shells).
I also recommend printing at a slightly higher hotend temperature than usual.
Please read SIL_hybrid_bow.pdf file before printing!
