Youtube Thingiverse Cults 3D

SIL hybrid bow - List of compatible bows and available adapters

This is a DIY development project, so there will also be adapters for other bows in the future.
The list includes bow adapters designed by me and other people's designs who have adapted SIL to suit their own bows.

SIL hybrid - compatible compound bows

  • EK Archery (POE LANG) Assassin / Exterminator (RH, ATA 30", 15-70 lbs, 18-31", 3.6 lbs) Click to see
  • This is the first compatible bow for which this design was made. Adapter is included in ZIP package (STL and STEP).
    Draw length is limited in range 20-25 inches (recommended 24 inches).
    Draw weight is limited from 20 lbs (20 inches draw length and -7 turns on bow limbs - about 130 fps / 13 J) to 50 lbs (25 inches draw length and 0 turns on bow limbs - about 245 fps / 47 J).
  • EK Archery (POE LANG) Rex (RH, ATA 28", 15-55 lbs, 20-29", 3.2 lbs) Click to see
  • Adapter for one of the cheapest compound bows. Adapter is included in ZIP package (added 2020.11.09).
    Draw length 21"-26" (recommended 25").
    Draw weight 16-49 lbs (21" -5 turns - about 100 fps / 8 J, 26" 0 turns - about 225 fps / 40 J).
  • Junxing M125 (RH/LH*, ATA 30", 30-70 lbs, 23.5-30.5", 3.7 lbs) Click to see
  • This inexpensive powerfull compound bow is also known as the "Predator Archery Raptor", "Spot On Rogue", "Sharp Eye" and "Greyback".
    * - for left-handers only the "Greyback" bow is available.
    Instead of the standard 3 M5x50 mm screws you need 3 M5x55 mm screws for this adapter. Adapter is included in ZIP package (added 2021.01.17).
    For Junxing M125 bow with a straight rod that pulls back the bow cables check the file " bow_adapter_junxing_m125_straight_rod.stl" (added 2021.02.17). Draw length 23.5", 24.1", 24.7" (positions 1-3 on cams) - recommended 24.1" (position 2).
    Draw weight 30-70 lbs (23.5" -9 turns - about 185 fps / 27 J, 24.7" 0 turns - about 290 fps / 66 J).
  • Man Kung MK-CB50 Aurora (RH, ATA 28", 30-55 lbs, 19-29", 3.3 lbs)
  • Adapter designed by schnuffi84. Check here.
  • Mission Hammr (RH, ATA 28", 16-70 lbs, 17-29", 3.4 lbs)
  • Adapter designed by SYL20MM. This is 3D printed slider only (without rollers). Check here or here.
  • Sanlida Dragon X8 (RH, ATA 30", 10-60 lbs, 18-31", 3.8 lbs) Click to see
  • Adapter is included in ZIP package (added 2021.02.17). For this adapter you need 2 pieces M5x55 mm screw and 1 piece M5x29 mm (you can cut M5x30 mm screw to right length or use 1 mm shim from outer side of the wheel).
    Draw length 21"-26" (recommended 25").
    Draw weight 20-50 lbs (21" -8 turns - about 130 fps / 13 J, 26" 0 turns - about 240 fps / 45 J).
  • Topoint M1 (RH, ATA 28.25", 20-70 lbs, 19-30", 3.3 lbs)
  • Adapter designed by proteinman. Check here or here.

SIL hybrid - compatible recurve bows

  • Top Archery 56" (RH, 30-50 lbs /30, 35, 40, 45, 50/, 30")
  • Adapter designed by IrishMoss. Check here.